NASA SLI
May 2026 to May 2027
NASA SLI materials
Vehicle, avionics, recovery, and air brakes. Payload and safety bills of materials are still being written. We ask sponsors for materials. Travel is Cleveland State, or us.
Build materials
| Item | Qty | Total |
|---|---|---|
| Fiberglass body tubes (60") | 3 | $778.05 |
| 1/2" G10 for bulkheads | 2 | $103.92 |
| Airframe bulkheads | 4 | $35.20 |
| Copper cap ejection carrier | 8 | $8.56 |
| Coupler bulkheads | 4 | $35.20 |
| 4-40 tap | 1 | $9.59 |
| 4-40 shear pins | 4 | $31.84 |
| 10-32 screws for thrust plate | 1 | $11.57 |
| 6-32 screws | 1 | $14.57 |
| 6-32 female mount | 1 | $19.97 |
| Threaded rod nuts | 1 | $3.54 |
| E-bay threaded rod | 1 | $12.82 |
| Screw switch for e-bay | 4 | $16.00 |
| E-bay screw terminals | 1 | $8.00 |
| 12" fiberglass coupler | 2 | $125.14 |
| Fiberglass nose cone | 1 | $149.99 |
| 2S LiPo for altimeters | 2 | $45.98 |
| Redundant dual altimeter | 1 | $125.15 |
| Electronics standoffs | 1 | $12.74 |
| #4 screws for altimeter | 1 | $5.94 |
| Dual deploy altimeter | 2 | $223.92 |
| Secondary L1520 reload kit | 2 | $649.98 |
| Primary L1150 reload kit | 2 | $649.98 |
| 75mm motor hardware | 1 | $705.99 |
| Fiberglass motor centering rings | 6 | $52.80 |
| Fiberglass motor mount tube | 60 | $90.00 |
| 1500 lb swivel | 3 | $38.85 |
| Dual deploy igniters | 5 | $114.75 |
| FFF black powder (1 lb) | 2 | $39.98 |
| 3/8" Kevlar shock cord | 27 | $87.75 |
| U-bolts | 6 | $38.82 |
| Main chute blanket | 2 | $43.90 |
| Parachute blanket shield | 3 | $65.97 |
| 1515 rail buttons | 3 | $22.47 |
| 5/16" quick link | 5 | $17.80 |
| Drogue chute | 2 | $63.90 |
| Main chute (60 in) | 2 | $183.90 |
| High strength carbon fiber | 2 | $565.28 |
| 1515 rail buttons | 2 | $14.98 |
| Strong fiberglass epoxy | 2 | $165.50 |
| Thrust plate 75mm, 5.0" | 1 | $58.38 |
| Flanged motor retainer 75mm | 1 | $79.62 |
| Cartridge and rail | 3 | $511.68 |
| M2 cartridge screws | 1 | $6.01 |
| Aluminum stock for spiral | 1 | $13.23 |
| 25T servo flange | 1 | $6.99 |
| M3 screws | 1 | $5.94 |
| Bearing | 10 | $53.00 |
| Shoulder screw | 5 | $17.80 |
| Washer for bearings | 1 | $21.94 |
| Aluminum for pedals | 1 | $6.62 |
| 30 kg servo | 1 | $30.99 |
| Subtotal | $6,202.49 | |
| Margin, 10% | $620.25 | |
| Materials total | $6,822.75 |